2. Safety Precautions
1. Features
3. Handling of the Unit
The installation should be made by qualified service
personnel or system installers and should confirm
to all local codes.
(1) Never attempt to disassemble or modify the camera.
NIGHT VISION IR DOME CAMERA
The camera adopts advanced Digital Signal
Processor(DSP) technology,Enhances picture
quality greatly to horizontal resolution of
(2) If an abnormality should occur, immediately turn off
the power and consult your dealer.
1.Power supply
(1) use with a 12VDC regulated power supply
(2) To prevent fire or electrical shock, UL listed class
2 wiring should be used for the 12VDC input terminal.
(3) Be used to connect each lead to the appropriate
terminal. Wrong connection may cause malfunction
and/or damage to the video camera.
540TVL. Provides clearer and more vivid image.
Latest DSP controls for BLC, white balance,
and gain control.
4. Parts Description
Dome cover (transparent)
Camera body
Integrated efficient powerful IR LED array can
capture high-resolution picture even in complete
darkness. Night view distance up to10~15m.
Mounting Holes
2.Operating and storage locations
IR-LED
Wire hole
(1).Do not attempt to point the camera at the sun or
other extremely bright objects that cause smear to
appear no matter the camera is power on or not.
It leads to damage of the CCD(Charge Coupled
Device).
Light control design. Auto light detection for IR
LED switch control.
Body cover
Camera base
The camera is equipped with a Vari-focal lens,
f=4~9mm.
Front View
(2).When camera is installed next to equipment,
such as wireless communication device, it emits a
strong electromagnetic field, some irregularity such
as noise on the monitor screen may happen.
(3).Be sure to use a ceiling board having enough
strength to support this camera.
BOTTOM View
VDC-350PIV-V
VDC-350NIV-V
Manual pan /tilt mechanism,3-Axis Rotation.
Accept 12VDC power supply.
5. Cover Removal and Attachment
User Guide
To remove the body cover and camera body,
disassemble it with the L WRENCH provided in your
ACCESSORY set. (Rotating clockwise will close it
and rotating anti-clockwise will release it.)
(4).Assemble the camera's main parts and lens
quickly in a sanitary place.
Anda polygon dome shield, which can bear up to
120 pounds impact and won't be destroyed. It
has excellent sealing performance and can also
be installed by outdoor .
(5).Do not pull the cable, it may cause disconnection.
(6).Do not touch the inside of camera even if
something is wrong.
Acecessories
(7).Before installation, make sure to disconnect the
power supply first, check the ground connection,
and then install it.
Polygon material made dome shield possesses
high light permeate rate, strong shock resistance
capability. The whole Aluminum base can stand
lasting shock and high temperature.
(8).Operating temperature range:-10℃~+50℃,(14°F~122°F);
Storage temperature range:-20℃~+60℃,(-4°F~140°F).
(9). Be sure to use proper screws which cameras can
be beared on the material firmly.
3. L WRENCH
1. PLASTIC
ANCHOR
2. ASSY SCREW
TAPPING
NIGHT VISION IR DOME CAMERA
NIGHT VISION IR DOME CAMERA
NIGHT VISION IR DOME CAMERA
1
2
3
1.PLASTIC ANCHOR: insert into the SCREW hole of the
installation location(to strengthen the installation).
2.ASSY SCREW TAPPING：use for installation on the
ceiling or wall.
4. Adjusting the Camera Direction
On: 1~3Lux; Off: 5~6Lux
1.0Vp-p, 75Omh, Sync Negative Polarity
DC12V Regulated
IR LED Drive
Video output
Power Input
Camera body moves in three ways: pan, tilt and rotate.
Adjust the direction so that the lens is pointing at the
target.
7. Self-Check Points
Before Consulting After-Sales Services
Power Consumption
Operating Temperature
Body
150mA(IR LED OFF)+150mA(IR LED ON)
-10℃ ～ +50℃, RH90% MAX (non-condensing)
Aluminum
3. L WRENCH：for body cover and camera base
assembly.
5. Use the lever to adjust the view angle and focus.
CHECKING POINTS
CONDITIONS
Screen
not turned on
*Make sure whether power is connected correctly.
*Check if the cable is connected correctly.
Rotate 180°
Tilt 90°
1000g
Weight
6. Installation
*If dust is seen through the monitor screen after
fixing lens, dissemble the lens and clear off the
dust on the surface of CCD withblower or soft cloth.
Screen not clear
or is spread
Pan360°
View angle
All data and specifications subject to change
without notice.
1.Drill a hole in the place where the camera is
installed. Completely insert the PLASTIC ANCHOR
provided. then lead the power and video cables pass
through the hole.
2.Disassemble the body cover and camera base
from dome camera .
3.Fasten the dome camera base on the wall or the
ceiling.
adjustment lever
Focus
adjustment lever
9. Type Number Overview
8. Specifications
Model(12VDC)
Signal system
VDC-350NIV-V
NTSC
VDC-350PIV-V
PAL
Model
VDC-350PIV-V
1/3'' SUPER HAD II CCD
PAL
VDC-350NIV-V
6. Turn the dome cover to adjust until the lens point at
the window, screw tightly and complete the installation.
Image Sensor
Signal System
Effective Pixels
Resolution
NTSC
Wall
Ceiling
752(H)x582(V)
768(H)x494(V)
Close
10. Dimension Outline
540TV Lines(Color), 600TV Lines(B/W)
Minimum Illumination
Shutter Speed
S/N Ratio
0.1Lux/F1.2(IR LED OFF), 0Lux (IR LED On)
1/50-1/100,000SEC
More Than 50dB
Automatic
1/60-1/100,000SEC
White Balance
AGC/BLC
Automatic
7. Connecting Low Voltage Power & Video Signal
The wiring harness have a BNC connector to accept
video signal ,the other connectors to accept the low
voltage power. For mounting directly to a wall or ceiling,
run power and video lines to the target location.
0.45
Gamma Correction
Sync Model
Lens
INT
Varifocal lens, f=4-9mm
146mm
IR LED
Wave Length 850nm, x 21pcs IR LED
10~15m
IR Beam Distance
VIDEO
12VDC
NIGHT VISION IR DOME CAMERA
NIGHT VISION IR DOME CAMERA
NIGHT VISION IR DOME CAMERA
NIGHT VISION IR DOME CAMERA
6
4
7
5
|