XPB50-AS
XPB50-BS(with pump
Air BubbleTwin-tub Washing Machine
Contents
Before using
Names of the parts.............the 2nd cover
Safety precautions ...............................1
Installation and adjustment ..................3
Introduction of the major functions .......5
Using process
Preparation before washing ................6
The musts in washing .........................7
Usage of the detergent .......................8
Washing sequence ..............................9
Disposal after washing .......................13
Please read this manual carefully before using.
Please retain it for future reference.
Please check if the receptacle is earthed relia -
ly before usage to guarantee your safety.
The manufacturer is not responsible for any
risks occurred owing to disobey these
stipulatio-ns.
Trouble-shooting*
Answers to question.....................15
Packing list ......................................17
Specification...............the back cover
Before Using
Names of the parts
Buzzer
Water-filling entrance
Water inlet selector handle
Wash selector
Wash timer
Outer cover of the spin tub
Inner cover of the spin tub
Spin timer
Spin tub frame
Control panel
Overflow filter
Quick water-filling entrance
Cascade outlet
Water level adjusting lever
Lint filter
Spin tub
Cabinet
Power cord
Valve cover
Pulsator
Wash tub
Drain hose
Base frame
Meaning and description of the symbols
Accessories
Contents marked with that symbol
Water-filling jointer
(one piece)
are related to the safety of the
Warning sign
product and the personal safety
of the users. Please operate in
strict conformity to the contents,
otherwise it may cause damage
of the machine or injure the
personal safety of the user.
Water inlet hose
(one piece)
Contents marked with that symbol
Forbidding sign
are actions forbidden to perform.
Performing of those actions may
result in damage of the machine
or injure the personal safety of
the user.
Gland
(one piece)
Before Using
Safety precautions
Do not stretch hands into the working
Do not decompose, repair or alter the
machine by yourself.
machine. It is dangerous even if the
rotation is slow. Take special care of
the children.
Do not put any hot or heavy items
( such as the kettle with hot water )
on the washing machine.
Do not wash laundries with volatile
materials (such as thinner, petrol etc.).
Petrol
Thinner
Handicapped or children without care
shall not use the machine.
Keep the machine away from direct
sunlight and heat source like the
heater.
Before Using
Installation and adjustment
Please install and adjust the machine according to the requirement of the manual.
It is very important to your security and correct operating the machine.
Usage of the drain hose(Only for XPB50-BS
The drainage shall be smooth with the drain hose.
1.The height of the drain hose shall be
less than 10cm , or the drainage will
not be smooth enough and cause
<10cm
incomplete drainage.
2.Do not tramp or press the drain hose.
3 If the drain hose is too long, cut it at mid point.
To make smooth drainage, cut the front end of
the hose slantingly.
4.If extra drain hose is needed , please make
separate purchase. The inner diameter of the
extra hose shall not less than 30mm, and the
length shall not exceed 1.5m.
> 30mm
<1.5m
If the extra hose is too long, cut it either
at point A or B.
A
B
Before Using
How to change the direction of the drain hoses
Figure 1 indicates the ex factory installation
position of the drain hose.
Back
Soft item
Extend the drain hose from the side of spin tub
Front
Put soft items on the ground. Lean the machine
down gently with the front surface facing the
ground. Take off the drain hose from the cabinet.
Take the hose out of the fixing groove.
(See to Figure 2).
Figure 1
Soft item
Figure 2
Embed the drain hose into the groove along the side
of the spin tub in the order of (1)~(3), heading for the
side of the spin tub. (See to Figure 3).
Embed the drain hose into the groove with
hands. Take care not to damage the drain
hose in fastening the fixing clamp.
Extend to the
spin tub side
Embed into the
groove in turn
Extend the drain hose from the rear side
Figure 3
Figure 4
Take out the drain hose from the fixing groove. Extend it from
the rear side as per the direction of the arrow. (When the drain
hose is extended from the rear side, it can be hung on the
point for drain hose at the two sides of the cabinet.)
(See to Figure 4).
Install the water inlet hose; Select the water level
Water inlet hose
Insert the water inlet hose into the water-filling
Water inlet jointer
Water inlet
entrance on the control panel, then push the
water-filling jointer into the entrance on the
control panel. (To dismantle the water inlet pipe,
just push the control handle as indicated in the
figure and pull it out)
Push
Control handle
Water level
indicator
Select water level according to the
quantity of the laundries.
Set the water level adjusting lever
Max
Med
Maximum
about 43L
to needed line.
Medium
about 36L
Page8
Min
Minimum
about 30L
Using process
Introduction of the major function
The machine has good comprehensive performance, and nice appearance.
In the respect of increasing the clean rate, it creates the air suction washing method.
The spinning of the pulsator automatically produces large quantity of bubbles, which can
strengthen the activity of the detergent remarkablly.And the rising and exploding of the
bubbles produce the effects of absorption and bombardment on the dirt particles in the
fibre of clothes that is difficult to remove by common washing methods.
It adopts complete enclosed base frame and low-noise motor, and thus reduces the
working noise significantly. We can guarantee that the purchase of this machine will bring
you a clean world without disturbing your quiet life.
Bubble washing
When the pulsator rotates, the machine will
inhale air and produce small bubble. The bubble
can explode and produce tiny water current to
help dissolving the detergent, and improve the
cleaning capability the detergent , therefore
raise the cleaning ratio.
Pulsator
Foam-removing spinning during high-efficiency rinsing
Foam-removing
spinning
Use the foam-removing spinning to
Spin
remove the extra detergent liquid. It can
both shorten the washing time and save
the water consumption.
Spin for about Fill water for Spin for about
1~2 minutes about 1 minutes 1~2 minutes
Remove most of the foam
extra detergent liquid. it can
both shorten the washing
time and save the water
consumption.
Remove the detergent
liquid remained
The effect is best when the
laundries quantity is below
80% of the rated value.
Quick water-filling entrance
If you do not need spraying spin, you can
fill water into the wash tub directly through
this entrance. It can reduce the humidity
inside the control panel significantly and
prolong the operating life of the components.
Quick water-filling entrance
Using process
Preparation before washing
Preparation before washing
1.Connect the water inlet hose.
2.Confirm that the washing machine is earthed
reliably . Then insert the power plug into the
receptacle. Do not connect the earth terminal
to the gas pipe and tap water pipe.
3.Put down the drain hose(Only for XPB50-AS)
or put the drain hose up the suitable position(
Only for XPB50-BS)
Pay attention to followings before washing the laundries
Confirm
if Clear the pocket. Fasten the
The quantity of
When the pulsator
there's special Take out the
requirement for coins , sand,
the laundries. hairpins etc.
buttons and
zippers.
the laundries is running , the
shall not exceed buttons of the
the rated value. laundries may
The big laundries cause noise. For
like the jeans
shall be put in
loosely.
t h e s a k e o f
discretion,please
put the laundries
with buttons into
other laundries.
Using process
The musts in washing
The capacity of washing and spinning of
the machine refer to the largest weight of
the standard laundries under dry condition
that can be washed or spinned in one time.
Laundries quantity in one washing cycle
shall be lower than the rated capacity.
The largest capacity of this machine is
5.0 kg.
The thickness ,size , type of the cloth will
influence the actual washing capacity. It
is suitable to put in reasonable amount of
laundries and the laundries can be turned
round in washing for one time washing.
Do not select " Maximum " water level
for laundries less than 2.4kg, so as to
avoid splashing of water.
Reference weight of the laundries
Working suit up,down
cotton,about 1120g
Jeans about 800g
Blanket
cotton,about 900g
Blending coat
about 800g
Pajamas
Jacket
cotton,about
800g
Shirt
cotton,about
300g
Single bed sheet
cotton,about 600g
Undershirt
cotton,about 180g
Socking
blending,about 50g
Underpants
cotton,about 70g
Using process
Usage of the detergent
How to use the whitener
Fill water to decided level. Dilute the whitener with container. Pour it slowly into the
washing tub.
Avoid using whitener on laundries with color or pattern as they are prone to lose color.
The whitener shall not touch the laundries directly.
Refer to the user's manual for the usage and quantity of the whitener.
For powder whitener, please dissolve it before using.
How to use the washing powder
Direct dissolved in the machine:
1.Fill small quantity of water.
2.Add the powder . Run for 30 seconds to
dissolve it completely.
3.Put it in the laundries. Select suitable
water level.
The powder is more prone to pollute the
laundries than the detergent. Therefore
please use it with proper quantity.
It is suggested not to use high sudsing
detergent.
The instant dissolving of the washing powder:
1.Prepare warm water of 30 C and a container.
2.Add the powder while stirring to fully
dissolve it.
Dosage of different washing powder is
different. Please refer to the instruction
of the washing powder for the detail
dosage.
Selection of the quantity of the washing powder
list 1
Standard dosage
Laundries
quantity
Water level
Water quantity
Concentrated washing
powder
Common washing
powder
Maximum (about43L)
Medium (about36L)
Minimum (about30L)
About
36g
About
3.6kg~5.0kg
2.0kg~3.6kg
Below2.0kg
43g
About
30g
About
About
36g
30g
About
25g
Selection of the current , water level and washing time list 2
Washing time
(minutes)
Laundries
quantity
Water level
Water quantity
Current
Laundries
Knitwear
About3~6
About8~10
About10~13
About7~13
About2~4
About3~6
About8~10
Medium (about36L)
~
Maximum (about43L)
Cotton,blending,linen
Very dirty and thick
Bed sheet
2.4kg~5.0kg Strong
Silk(thin laundries)
Chemical fiber
Minimum (about30L)
~
Medium (about36L)
Below2.4kg
Standard
Cotton,blending,linen
Using process
Washing sequence
Water-filling selector handle
Overfilling sign
Wash timer
Wash selector Water-filling entrance
Buzzer
(The buzzer will ring when
the washing finishes)
Spin timer
(To set to below 2 minute, (Soft current,
(to set to below 1 minute,
first set to 2 minute then
turn it back. it can increase
the service life of the timer).
first set to 5 minute then
turn it back. it can increase
the service life of the timer).
strong current)
OFF
SILK
STRONG
SOFT
OFF
SPIN TIMER
SILK
WOOL
BUZZER
WOOL
OFF
DRAIN
MAX
COTTON
LINEN
WASH SELECTOR
WASH TIMER
Wash
1.Water-filling selector
(1) Set the water-filling selector at the "WASH" side.
(Figure 1)
WASH SPIN
Figure 1
(2) Set the water level adjusting lever to needed line.
2. Fill the water and add the dissolved washing
powder to make the water level reach the preset
position. (Figure 2)
Run washing program for some time to stir and
dissolve the powder completely.
Figure 2
Figure 3
Figure 4
STRONG
3.Put in the laundries. If the water quantity is
insufficient, please add water.
SOFT
DRAIN
WASH SELECTOR
4.Select the current.
Select the strength of the current according to
the laundries. (Figure 3)
OFF
SILK
WOOL
COTTON
LINEN
5.Select the washing time
Select the washing time according to the laundries.
(Figure 4)
WASH TIMER
STRONG
SOFT
6.After washing, the buzzer will ring. Set the "WASH
SELECTOR" at "DRAIN". (Figure 5).
DRAIN
Figure 5
WASH SELECTOR
Using process
Midway spinning
1.Put the laundries into the spin tub evenly and smoothly.
2.Spin
(1) Put the gland in properly.
Please put in the gland properly even if the laundries quantity is small.
Gland
Push
Push
The laundries
are slanting
Proper
Proper
No gland
(2) Close the inner and outer cover of the spin tub.
Outer cover of
The spin tub
Inner cover of
The spin tub
(3) Spin for 1-2 minutes.
3.Run the foam-removing spinning.
(1) Open the outer cover of the spin tub.
(2) Set the water-filling selector control
rod at the "SPIN" side. Fill water for
about 1 minute.
WASH
SPIN
If the water quantity filled is too large,
the water may flow out from the wash
tub side. Please twist the water tap to
limit the water filling.
(3) Close the outer cover of the spin tub.
Spin for 1-2 minutes.
Using process
Rinsing
Rinse with water-filing
OVERFILL
1.Put the laundries into the wash tub. Select
suitable current according to the laundries.
If the water flows out
of the overfill holes,
that is overfilling
2.Adjust the water level
Set the water level with water level adjusting
lever according to the laundries quantity.
Then fill suitable water continuously.
3.Rinse
Adjust the wash timer to 5-7 minutes to do
rinsing.
(Repeat the midway spinning and
rinsing with stored water for 2-3 times)
Rinse with stored water
1. Put the laundries into the wash tub. Select suitable current according to
the laundries.
2. Fill water to preset water level.
3. Rinse
Adjust the wash timer to 2-3 minutes to do rinsing.
When the laundries quantity is below 2.4kg, please use "Standard" current.
If you use "Strong" current, it may splash.
Using process
Spinning
Selection of the spin time list 3
1. Put the laundries into the spin tub
evenly and smoothly.
Spin time
(minutes)
Laundries
Bed sheet or
blanket
2. Press the gland in the tub properly.
Close the inner and outer cover of
the spin tub.
About 4~5
About 2~4
About 1~2
Underwear
(knitwear)
Swear
(chemical fiber)
3. Spin
Select suitable spin time according
to the laundries, and do spinning.
Blending thin
laundries
Within 1 minute
During spinning, if there's abnormal
sound, it is generally owing to slanting
placement of the laundries. Please
stop the machine and re-order the
laundries.
In spinning, it will pause the work if you open the outer cover of the spin
tub. Close it to resume the spinning.
To do spinning and draining or rinsing
with water-filling together, please first
do spinning for around 1 minute, then
do draining or rinsing with water-filling.
Otherwise the spinning will stop owing
to too much water stored in the spin tub.
Using process
Disposal after washing
After using, please clean the lint and foreign materials of the lint filter and overflow filter
in time. Otherwise it may influence your using the machine.
Please first pull off the power plug from the receptacle before cleaning.
Cleaning the lint filter
The lint filter must be used during washing.
It must be cleaned in time after each using.
1. Take off the lint filter
Put hand at the indicated position.
Push down to take it off. ( See to
Figure 1)
Figure 1
2. Clean the lint
Put it in water and clean while it is
still wet.(See to Figure 2)
Figure 2
3. Install the lint filter
After cleaning, insert the bottom
of the lint filter ( marked with
"down side") into the overflow filter ,
then push the upper part of the
filter in ( marked with " up side ").
(See to Figure 3)
Figure 3
Using process
Cleaning the overflow filter
Too much lint on the overflow filter will influence
the normal usage of the machine. Please
clean it every two months.
1 Take off the overflow filter.
As indicated in the figure, nip the elastic fixing
claw and pull it to the direction of the arrow to
take it off.
Elastic fixing
claw
2. Take off the corrugation pipe.
Dismantle the upper part of the
corrugation pipe inside the
overflow filter ( as indicated in
Figure 1).
Please don't pull the bubble pipe!
Water level
adjusting lever
Corrugation
Pipe
3. Cleaning the overflow filter
Clean the lint around the filter
and flush with tap water.
Figure 1
4. Install the overflow filter.
(1).Install the corrugation pipe.
(2).Insert the mounting plate at
the bottom of the filter into
the valve cover.
Hook
(3).Hang up the hook at the left
upper side.
Figure 2
(4).Push the upper part in as
indicated in Figure 2.
Disposal of the complete unit
After washing, dismount the water inlet
hose.
Do not store water in the tub for long
period. Discharge the water immediately
after each using.
Wipe the complete unit with soft cloth
twisted dry.
Wipe with neutral detergent if too dirty
Do not wash it directly by water
Pull off the power plug and hang up the
power cord.
Hang up the drain hose.
Wipe off the water drops on the surface
and inside the tub with clean soft cloth.
Open the cover of the wash tub and the
inner/outer cover of the spin tub for
some time (about one hour), then close
them.
Petrol
Thinner
Alcohol
Trouble-shooting Answer to question
If the laundries fall to the outer side of the spin tub
If the laundries fall to the outer side of the spin tub,
please take them out immediately.
1.Dismantle
As indicated in the figure, push the point marked
with " " to pull the spin tub frame to oblique
upwards to dismantle it.
Spin tub frame
2.Install
After install the back edge of the spin tub frame to
proper position, push the four points marked with
" " by force to reset it.
Spin tub
Please check carefully. The laundries may fall to the lower part
of the outer side of the spin tub (as indicated in the figure).
If the laundries fall to the outer side of the spin tub, during
spinning the draining will get blocked and the rotation speed
of the spin tub is reduced.
Laundries
When the remained water is frozen
Prevent the freezing (be sure to discharge the water completely after using)
After complete draining, set the "WASH SELECTOR" at "STRONG" or "STANDARD".
If it is set at "DRAIN", it will be rather difficult for the frozen water to melt.
Below 50
2~3L
When the water is frozen
Pour hot water below 50
into the wash tub
to soak it completely. Then turn the pulsator
with hands gently. Please confirm the drainage
can work normally before next using.
Trouble-shooting Answer to question
(If there's breakdown, please pull off the power plug before checking) The following
phenomena are not breakdowns sometimes. Please confirm again before sending
it to repair. If there are real breakdowns, please come to the special maintenance
department or after-sale service department of our company. Do not repair it by yourself.
Phenomena
The reason
Is there power failure?
Is the power plug loose?
Is the pulsator twisted by foreign materials?
The machine does not act.
Is the drain hose put down?
Is the drain hose frozen?
The draining does not work
Is the drain hose blocked by foreign material?
Are there laundries falling to the outer side of
the spin tub?
There's abnormal sound
during washing
Are there hair pin, coins or metal items brought
inside the tub?
There's abnormal sound
and violent vibration
during spinning
Is the machine slanting?
Is the gland pressed evenly?
Are there laundries falling to the outer side of
the spin tub?
Are the laundries in spin tub too much?
There may be some water
flowing out of the drain
hose in the first use of
the machine.
It is the water remained in the factory inspection
of performance.
The pump is working,
but no water to be
drained out(only for
XPB50-BS)
Turn the wash selector to the other position except
DRAIN,the spinning timer does not work,and then
return to the DRAIN,then water will be drained out..
Packing list
Name
Quantity
One
Storage position
User's manual
Inside the document bag
Inside the accessory bag
Inside theaccessory bag
Water inlet hose
Water-filling jointer
Gland
One
One
One
One
One
Inside the accessory bag
Inside the document bag
Lint filter
Twin-tub washing machine
Specification
Air bubble twin-tub
washing machine
XPB50-AS
Air bubble twin-tub wash-
ing machine with pump
XPB50-BS
Type
Model
Rated voltage 115V~,Rated frequency 60Hz
High/43L Medium/36L Low/30L
5.0
Power source
Water level Water quantity about
Rated washing capacity kg
Rated spinning capacity kg
Rated input power W
Dimension(mm)
5.0
Wash 360 Spin 160 Wash 360 Spin 160
L740 W428 H890
New current + bubble
Wash pattern
26
28
Weight kg
0.02MPa~0.2MPa
Injection pressure
|