Huey Chiao HCB26 User Manual

Bluetooth Headset User Guide  
HCB26 has a feature of even weight wear it  
on both sides of your ear comfortably, almost  
without feeling it.  
Index  
ꢀ. Notice before using  
2. Package List  
3. Product Introduction  
4. Charging the Headset  
5. Power On/ Off  
6. Pairing the Headset (or any Bluetooth Device)  
7. Wearing the Headset  
8. Answering calls  
9. Refusing calls  
ꢀ0. Ending calls  
ꢀꢀ. Voice Dialing  
ꢀ2. Redialing  
ꢀ3. Mute  
ꢀ4. Transferring calls  
ꢀ5. Maintaining calls  
ꢀ6. Ending Call ꢀ and answering Call 2  
ꢀ7. Triple Phone Conversation  
ꢀ8. Adjusting the Volume  
ꢀ9. Safety Instruction  
20. Specifications  
2ꢀ. Excluding Problems  
22. Storage of the Headset  
23. Q & A  
24. Declaration of Conformity  
25. Company Website  
1. Notice before using  
Thank you for purchasing our Bluetooth Headset HCB26. First  
of all, please check to find everything in your package and care-  
fully study the user guide to know the function details. HCB26  
is developed by the innovative Bluetooth wireless technology,  
enabled to connect the Bluetooth mobile phone designed with  
Audio Gateway (HCBꢀ8/ HCB2ꢀ), PDA, desktop and notebook  
with the USB Bluetooth Dongle plugged-in, etc. Before using  
it, please confirm your mobile phone complies with Bluetooth  
Vꢀ.ꢀ/ Vꢀ.2 and supports the Bluetooth Headset or Handsfree  
Profile.  
2. Package List  
Please inspect the product you purchased. Refer to the below  
package list to make sure there is no shortage or defect inside.  
The complete package includes the following items:  
HCB26 Bluetooth Headset ...............ꢀ  
User Guide........................................ꢀ  
Warranty Card ..................................ꢀ  
Travel Charger (INPUT: AC100-240V, 50/ 60Hz, OUTPUT:  
DC5.ꢀV, 20mA) .............................ꢀ  
If you find any shortage, please contact the retailer shop where  
you purchased this product.  
2
3. Product Introduction  
Function (Answering/ Ending/ On/ Off) Button 3  
LED (Indicator) Light  
Receiver (Speaker)  
Microphone  
Power Interface adapter (charging)  
Ear Hook  
Decrease Volume key (-) ꢀ  
Increase Volume key (+) 2  
Note:  
● For first time use, make sure to fully recharge the Headset bat-  
tery.  
4. Charging the Headset  
HCB26 comes with a Lithium Polymer battery built-in.  
3
ꢀ. Plug the travel charger into the power socket.  
2. Plug the end of the travel charger into the power interface  
adapter of the Headset.  
3. While charging, the indicator will turn red; when charging is  
completed, the red indicator will shut off or flashes red.  
Note: Charging time is around 90~ꢀ20 minutes.  
● For first time use, make sure to fully recharge the Headset up to  
4 hours. After a long time of not using it (around one month),  
while recharging, it takes a while for the indicator to turn red.  
● While charging, please do not use the Headset.  
● Please use the original charger to recharge the Headset.  
● When the indicator flashes the red light, it means the battery is  
low, please recharge the Headset right away.  
● Please recharge the Headset within the temperature range of -10  
(+14) +45(+113).  
5. Power On/ Off  
ꢀ. Press and hold the function button for 2~3 seconds, the power  
4
will turn on after the indicator flashes the blue light 3 times.  
2. To turn the power off, press and hold the function button for  
2~3 seconds until you see the red indicator flash 3 times.  
Note:  
● While turning the Headset on, you will hear the “Du Du” sound  
from the receiver. The blue indicator light will flash 5 times,  
then 2 times, and after repeating this for 5 times, the indicator  
will flash the blue light every 3 seconds to come into a standby  
mode.  
● While the Headset is turned on, it will automatically search for  
the paired device. Under “ON” mode and within the effective  
range of 10 meters from the Headset, the indicator will flash the  
blue light to indicate that it entered the connecting mode.  
● When turning the headset off, you will hear one “Bi” sound fol-  
lowed by two “Du” sounds, then the indicator will shut off after  
flashing the red light for a few times.  
6. Pairing the Headset (or any Bluetooth Device)  
You must pair the Headset with your Bluetooth phone or any  
Bluetooth device before you use the Headset for the first time.  
.Ensure the Headset is off.  
2.Press and hold the function button for 5 seconds until the blue  
indicator light flashes with the red indicator light to enter the  
pairing mode.  
3.Ensure your mobile phone has the Bluetooth function and  
5
start the Bluetooth new device searching function. Please  
follow the instructions of your mobile phone to proceed the  
operation.  
4.When your mobile phone is in the stage of searching a new  
Bluetooth device, it will find HCB26.  
5.Please choose and confirm HCB26.  
6.Key in the Headset Password “0000” and press YES. If the  
pairing is successful, the indicator turns to flash the blue light  
only. For some mobile phones, after pairing you may have  
to select and confirm HCB26 again to start the connection.  
(Please read your mobile phone manual carefully to take the  
right steps.)  
7.The Headset is in the standby mode, you can start to receive  
and make call.  
Note:  
● If the pairing is not successful, the Headset will return to the  
standby mode, please repeat the pairing process to try the pair-  
ing again.  
● While pairing, it is better to keep the distance between the mo-  
bile phone and Headset around ꢀ0 cm to ꢀm and make sure no  
metal objects are between.  
● While pairing the Headset with other Bluetooth device, when  
the device asks for the Password, please key-in “0000”. For  
more details, please check the manual of your Bluetooth device  
to proceed the operation.  
6
● Even though the following situations happen, the paired devices  
remain pairing.  
- The power for one of the devices is off.  
- The service for one of the devices is off.  
- One of the devices is re-switched on.  
7. Wearing the Headset  
According to your preference, adjust the headset on your left  
or right ear.  
8. Answering the calls  
ꢀ. While there is a call coming, wait until you hear the ringing  
from your Headset receiver to press the function button to  
answer the call.  
2. If the mobile phone is ringing first, wait until the Headset is  
7
ringing, then press the function button.  
3. While answering the calls, the blue indicator light flashes 4  
times each second.  
4. If the mobile phone is ringing and your Headset is off, turn  
on your Headset first, then press the function button to answer  
the call.  
5. If your mobile phone has the function of automatically re-  
ceiving calls and you already set it up, while the call is com-  
ing, your Headset can receive the call automatically without  
pressing the function button.  
Note:  
● For some mobile phones, the ringing sound of the Headset may  
be the same as the ringing sound of the mobile phone, such as  
Nokia…  
● For some mobile phones, the ringing sound of the Headset is  
not the same as the ringing sound of the mobile phone, such as  
Motorola…  
9. Refusing calls  
Wait to hear the ringing from your receiver, then press and hold  
the function button for 2~3 seconds until you hear the “Du”  
sound to refuse the calls.  
10. Ending calls  
ꢀ. When the conversation is over, press the function button to  
8
end calls.  
2. Wait until the other end hangs up the phone to end calls.  
11. Voice dialing  
ꢀ. If your mobile phone supports the voice dialing function, you  
can use this function with your Headset too.  
2. Under the standby or connecting mode, press the function  
button of the Headset and follow the mobile phone instruc-  
tions to proceed with the voice dialing.  
Note:  
● The activation of the voice dialing function will depend on the  
design of your mobile phone.  
● The working range of the Bluetooth Headset is 5 meters indoors  
and 5~ꢀ0 meters outdoors.  
12. Redialing  
ꢀ. If your mobile phone supports the redialing function, you can  
use this function with your Headset too.  
2. Under the standby or connecting mode, press the decrease  
volume key (-) of the Headset for 2~3 seconds until you hear  
the “Du” sound to redial the last call.  
13. Mute  
ꢀ. During a phone conversation, press the decrease (-) and in-  
crease (+) volume key at the same time until you hear the  
9
“Du” sound, then the other end will not hear you.  
2. Under the mute mode, you will hear the intermittent “Du”  
sound.  
3. Press either the increase (+) or decrease (-) volume button to  
end the mute function.  
14. Transferring calls  
ꢀ. When you are answering the call with the Headset, press the  
increase (+) volume key for 2~3 seconds until you hear one  
“Du” sound, then the call will be transferred to your mobile  
phone.  
2. When you are answering the call with the mobile phone, press  
the function button of the mobile phone to transfer the call to  
your Headset. For some mobile phones, the phone LCD will  
show the transferring sign, some will not.  
Note:  
● To activate this function, your mobile phone must support the  
Handsfree mode. For more details, please check the manual of  
your mobile phone.  
15. Maintaining calls  
ꢀ. When you are answering the call with the Headset, press the  
decrease (-) volume key for 2~3 seconds until you hear one  
“Du” sound, then the call will be maintained. If there is an  
interrupting call coming, the Headset will answer it automati-  
ꢀ0  
cally.  
2. Press the decrease (-) volume key for 2~3 seconds until you  
hear one “Du” sound to end the maintaining call function.  
Also do this to renew the call.  
Note:  
● To activate this function, please make sure the assigned tele-  
communications agent provides this service.  
● To activate this function, please refer to the instructions of your  
mobile phones manual to make sure your phone program sup-  
ports this function.  
16. Ending Call 1 and answering Call 2  
While you are answering Call ꢀ from your Headset, and having  
the interrupting call, you will hear the notifying “Du Du” sound.  
Press and hold the decrease (-) volume button for 4~5 seconds  
until you hear one “Du” sound followed by the music, Call 1  
will be ended and the interrupting call (Call 2) will be answered  
automatically.  
Note:  
● To activate this function, please make sure the assigned tele-  
communications agent provides this service.  
● To activate this function, please refer to the instructions of your  
mobile phones manual to make sure your phone program sup-  
ports this function.  
ꢀꢀ  
17. Triple phone conversation  
ꢀ. While you are answering Call ꢀ from your Headset and hav-  
ing the interrupting call, you will hear the notifying “Du Du”  
sound. Press the decrease (-) volume key for 2~3 seconds  
until you hear the “Du” sound, Call 1 will be maintained and  
the interrupting call (Call 2) will be answered automatically.  
2. To proceed the triple phone conversation while you are an-  
swering the interrupting call (Call 2), press the increase (+)  
volume key for 2~3 seconds until you hear the “Du” sound,  
the maintained Call ꢀ will be renewed, then the three ends  
can talk together.  
3. To end the triple phone conversation, press the function but-  
ton, then Call ꢀ and Call 2 will be hanged up together.  
Note:  
● To activate this function, you must make sure the assigned tele-  
communications agent supports this service.  
● To activate this function, please refer to the instructions of your  
mobile phones manual to make sure your phone program sup-  
ports this function.  
● When the triple phone conversation is on board, it can not return  
to the mode of having only Call ꢀ or Call 2.  
● When the triple phone conversation has not been activated, you  
can press the decrease (-) volume key for 2~3 seconds to easily  
transfer the calls between Call ꢀ and Call 2.  
● If Call 1 is maintained and Call 2 is on line, quickly press the  
ꢀ2  
function button to end Call 2 and renew Call ꢀ.  
18. Adjusting the Volume  
During a call, you may adjust the Headset’s volume.  
ꢀ. To increase the volume, press the increase (+) volume key.  
2. To decrease the volume, press the decrease (-) volume key.  
Note:  
You will hear the “Du Du” sound while adjusting the volume up  
to the loudest or lowest.  
19. Safety instruction  
ꢀ. Read the Headset manual carefully and use the headset cor-  
rectly by following the instructions.  
2. Keep the Headset away from children, avoid children from  
swallowing it accidentally.  
3. Do not use the cleaning liquid or spray to clean the Headset.  
4. Do not clean the Headset while charging it.  
5. Do not disassemble the Headset. If you encounter a problem,  
contact the retailer shop.  
● Urgent handling  
-If you enconter a problem, turn the Headset off first.  
ꢀ3  
-If the inside components breakdown, please contact the repairing  
center to ask for immediate support and service.  
20. Specification  
Product Model No.  
HCB26  
Standard Convention/ Signal Output Bluetooth Vꢀ.2, Class II  
Frequency Band  
Talk/ Standby Time  
Supporting Profile  
Connection  
2.4GHz ~ 2.4835GHz, ISM Band  
Up to 9 hours / Up to 300 hours  
Headset & Handsfree  
Peer to Peer  
Data Encryption  
Power Capacity  
Power Supply  
ꢀ28 bits encrypted  
Rechargeable Li-Polymer  
5V DC, ꢀ00~240V AC adapter  
-ꢀ0 ~ 55 ℃  
Operation Temperature  
Facility Saving Temperature  
Operation Moisture  
Weight  
-20 ~ 60 ℃  
ꢀ0% ~ 90% (non-concrete status)  
ꢀ3.ꢀ g (battery included)  
52xꢀ8.8x2ꢀ.3 mm  
Size  
Safety Regulation  
CE, FCC, BQBv  
ꢀ4  
21. Excluding Problems  
1. The Headset flashes the red indicator light: The battery is low,  
please recharge your Headset.  
2. If after recharging for 20 minutes, the Headset does not turn  
on: For initial use, the power will be on after charging the  
Headset at least for 40 minutes. It is suggested to fully re-  
charge the Headset if you use it for the first time.  
3. Does not show the recharging sign: When the battery is com-  
pletely exhausted or the Headset has not been used for a long  
time, when charging, the red indicator light will be lit after a  
few minutes.  
4. You hear no sound coming from the Headset:  
- Make sure the Headset has been paired with the other Blue-  
tooth device.  
- Make sure the Headset is on.  
- Make sure the distance between the Headset and the paired  
Bluetooth device is within ꢀ0 meters.  
- Make sure your mobile phone has a good signal.  
- Some Bluetooth mobile phones support only one Headset, if  
you pair it with more than one Headset, it may cause the other  
Headsets being cut off.  
22. Storage of the Headset  
- Using the non-original accessories, it may debase the product’s  
function, cause the product damage, electrical conflict and the  
termination of the warranty.  
ꢀ5  
- Do not disassemble the Headset, it may damage the Headset  
accidentally or cause the warranty invalidation.  
- Put the Headset away from places full of dust.  
- Use clean and soft fabric to clean the Headset’s surface.  
- Put the Headset into your pocket while not using it.  
- Be aware not to let Children play with the Headset, avoiding  
accidents from happening or damaging the product.  
- Avoid storing the Headset in high or extra low temperature.  
[Travel charger]  
- The travel charger is designed for indoor use, please do not  
use it outdoors.  
- Connect the travel charger with the correct power supply.  
- Avoid pulling the cable to take the travel charger off the sock-  
et, it may damage the travel charger.  
[Battery]  
- New battery: for first time use, please fully recharge the  
battery for 4 hours.  
- Only authorized and qualified personnel can do battery chang-  
ing.  
- Under the normal usage, the rechargeable battery can be used  
for the long time.  
- The battery must be recharged within temperatures of -ꢀ0 ℃  
to 45.  
- Using the Headset under room temperature enables the bat-  
tery to achieve its maximum capacity.  
- Under a chilly environment, it may cause the battery’s capac-  
ꢀ6  
ity to decrease.  
- Recharge the Headset at least once every two months, either  
you use it or not.  
23. Q & A  
Q : Why does the fully-charged Headset under the “On” mode not  
work with the Bluetooth mobile phone?  
A: You must activate the Bluetooth function of your mobile phone  
and finish the pairing between your mobile phone and Head-  
set.  
Q : Can HCB26 work with any of the mobile phones?  
A : No, this Headset works only with Bluetooth mobile phones.  
Q : How far is the working distance between the Headset and the  
mobile phone?  
A : Since HCB26 is certificated by BQB, compliable with Blue-  
tooth Vꢀ.2, Class II, the longest working distance is ꢀ0 me-  
ters. But, this working distance may be shortened by the  
interference existed in the surroundings and due to the insuf-  
ficient Bluetooth function of the mobile phone.  
Q : Why does my Bluetooth mobile phone find many Bluetooth  
devices while searching for the new Bluetooth device?  
A : Most of the mobile phones are allowed to find more than  
one Bluetooth device within the working range. When the  
ꢀ7  
searching is finished, your mobile phone’s LCD will show  
HCB26 or some Unknown Devices. Please select and con-  
firm HCB26.  
Q : Why my mobile phone could not find the Headset?  
A : Only while your Headset is under the pairing mode, your mo-  
bile phone can find the Headset. Please follow the instruc-  
tions of your Headset manual to proceed the pairing process.  
Q : Shall we pair the Headset every time while using it?  
A : No. The paired devices remain paired regardless of turning the  
power off, reopening the devices or changing the battery.  
Q : Why is the voice from the Headset not clear?  
A : It may be the following two reasons:  
(ꢀ) Your location has a bad signal, please move to a location with  
a better signal.  
(2) The working range between the Headset and the mobile phone  
has been exceeded. Please make sure the Headset and mobile  
phone are within the working range of ꢀ0 meters and there is  
no obvious interference between.  
Q : What can I do if the voice from the Headset is not clear?  
A : Make sure your mobile phone is in a location with a better  
signal and increase the volume of the mobile phone or the  
Headset.  
ꢀ8  
Q : Why is the Headset suddenly not working?  
A : (ꢀ) The Headset might be out of power. When the battery  
is low, the Headset flashes the red indicator light, please re-  
charge it soon.  
(2) The Bluetooth function of your mobile phone gets crashes. It  
happens occasionally, please turn the Bluetooth function of  
the mobile phone off, and renew it or turn off your Bluetooth  
mobile phone and turn it on again.  
Q : Why could the voice dialing function of the Headset not be  
switched on?  
A : (ꢀ) Please re-record the voice tag.  
(2) Some mobile phones do not support the voice dialing function.  
Please refer to the manual of your mobile phone.  
24. Declaration of Conformity  
FCC (FCC ID: RL9-HCB08):  
HCB26 is FCC certificated as this device complies with part  
ꢀ5 of the FCC rules. It is built with new housing, extended  
from HCB08.  
European CE 0678:  
HCB26 has been manufactured in accordance with the Euro-  
pean R& TTE directive. It complies with the European Low  
Voltage Directive 73/23/EEC and the European EMC Direc-  
ꢀ9  
tive 89/336/EEC.  
BQB Qualification:  
HCB26 Bluetooth Headset, a BQB Qualified Bluetooth prod-  
uct is listed as qualified End Product in accordance to section  
6.2.4 of the PRD.  
25. Company Website  
Please visit our company website to know more product de-  
tails.  
20  
____________________________________________________  
____________________________________________________  
____________________________________________________  
____________________________________________________  
____________________________________________________  
____________________________________________________  
____________________________________________________  
____________________________________________________  
____________________________________________________  
____________________________________________________  
____________________________________________________  
____________________________________________________  
____________________________________________________  
____________________________________________________  
____________________________________________________  
____________________________________________________  
2ꢀ  

Acnodes APM5064 User Manual
Alpine CDE 7858 User Manual
Artemis Car Amplifier LA 1 User Manual
Bazooka BA260 User Manual
Bradford White Corp BRHHH User Manual
Canon Speedlite 320EX Flashlight 5246B002 User Manual
Casio FX 85GT PLUS User Manual
Casio Scientific Calculator fx 82ES User Manual
Hypertec N14628KHY User Manual
JVC GR DVL9200 User Manual